SafetyX is a patented traffic marker illumination system that adds synchronized, app-controlled lighting to traffic cones and channelizing devices—turning static nighttime work zones into clear, active guidance.
Nighttime lane changes, tapers and detours ask drivers to read a changing roadway in seconds. SafetyX supplements familiar traffic-control devices with visible, synchronized light at pavement level—where the decision is being made.
Cones and barrels depend primarily on reflection and ambient light.
Illuminated devices create a brighter boundary and an intuitive path through the change.
SafetyX’s patented platform combines secure cone mounting with coordinated active guidance. Crews use the control interface to organize devices, set brightness and select the behavior best suited to the traffic plan.
Place the puck inside the cone and turn the exterior knob. Its captive screw passes through the cone wall and threads into the puck.
Power the devices, assign groups and confirm each unit is communicating and responding.
Choose steady, synchronized blink or sequenced operation; adjust brightness and timing from one interface.
The final mechanical design keeps the two most common field actions simple: secure the puck from outside the cone, and replace the power pack from the bottom without removing the installed unit.
The circular side knob unscrews from the puck, then its captive screw passes through the cone wall and threads back into the puck.
The supplied sequence shows the sealed battery pack releasing from the bottom of the installed puck with a short 34-degree bayonet twist.
SafetyX brings essential work-zone controls together while synchronized device behavior keeps the intended command consistent across the group.
Built-in proprietary encryption protects control communications, while every SafetyX device automatically stays in sync with the other units in its group.
Organize deployed units and send encrypted commands to the full work-zone group from one interface.
Adapt visibility for dusk, darkness, ambient lighting and the needs of the site.
Run light patterns left or right to reinforce the intended path of travel.
Power, steady illumination, synchronized blink and step operation are available.
Schedule operation across the deployment with a shared on/off window.
Exchange the bottom-mounted battery pack without removing the puck from the cone.
An exterior knob drives a captive screw through the cone wall into the puck.
About 42 hours of tested continuous blinking provides 4–5 nights of service on one charge.
SafetyX supports nighttime work-zone visibility for highway lane closures, road construction, traffic incidents, special events and industrial vehicle routes.
SafetyX combines illuminated traffic cones, wireless group control and directional sequences to make temporary traffic patterns easier to recognize after dark.
It is a group of connected traffic safety lights that operate together. SafetyX units can illuminate, blink in sync or run a directional sequence across a line of cones and channelizing devices.
SafetyX adds active pavement-level lighting to familiar traffic-control devices, helping drivers recognize lane boundaries, tapers, detours and the intended path sooner.
Applications include highway lane closures, road-construction zones, emergency incident scenes, temporary detours, special-event traffic control and industrial vehicle routes.
The puck mounts inside the cone with an exterior screw knob. A rechargeable twist-lock battery pack changes from the bottom and provides about 42 hours of tested continuous blinking, or 4–5 nights of typical service.
Request a SafetyX demonstration or discuss product fit, deployment options and partnership opportunities for your organization.